Species: Sliced Pacific Maple
Cut: Quarter Cut Learn more about veneer cuts
Thickness: 0.6mm veneer with pre-glued heat-activated adhesive backing
Size: 2450mm long x 305mm wide
Tolerance: ±15mm on length, ±10mm on width; 30mm/m on flatness
Curve radius: Designed for use on curved surfaces with a minimum recommended bending radius of 200mm. Tighter bends may be possible using specialised techniques; however, any attempt to use smaller radii should be thoroughly tested and is undertaken at the purchaser's own risk.
Backing Options: Available as DGB, G2S, BAMO, or No Back (select sizes only). Learn more about backing specifications
Sheet Matching: Available in non-matching or matching sheets. Learn more about sheet matching
Finish: Unsanded raw veneer. Must be sanded and sealed with a UV-resistant, clear non-yellowing coating, oil, varnish, stain, or wax.
Recommended application: Ideal for laminating MDF, plywood, and most common wooden substrates. Perfect for cabinetry, wall panels, furniture, curved reception desks, column wraps, and decorative feature walls. Not recommended for solid wood application.
Application method: Apply using a household iron set to medium-high heat (150-180°C) with NO steam or a specialised heat applicator tool. Work in small sections (approximately 30cm at a time), applying even pressure as you go. After heating each section, immediately apply firm pressure using a veneer roller or J-roller to ensure proper adhesion. Allow the veneer to cool completely before proceeding with finishing.
Surface preparation: Ensure all surfaces are free of grease, dust and other dirt. The surface should be sanded flat and cleaned thoroughly before application.
Finishing recommendations: It is preferable to leave 4 or 5 days between application and finishing to ensure all heat from the application process has fully dissipated.
Edging: Matching veneer edging is available from Bord. While we endeavour to find the best match, please note that edging, even if the same species, may not exactly match the face veneer. Note that these pre-glued veneer leaves can also be used to finish panel edges.
Important information:
- Timber veneer panels are inherently subject to bowing, cupping, or warping, and may change colour when exposed to UV light. Read our wood-based panel specifications to understand tolerances and protection methods.
- Natural veneer from the same timber species can vary in colour and pattern between sheets. Images and samples should be used as a general reference only.
- Pre-glued veneer leaves are manufactured in different locations to veneer panels. While every effort is made to find the closest match, exact colour and pattern matching between these products is not possible. For specific matching requirements or to request a batch control sample, contact us before placing your order.
To give you the best rate, we offer various delivery options based on your destination, product type and order size. View our rates below or proceed to checkout to calculate your delivery cost.
Free Pickup - Somerton VIC
Free pickup available between 7.00am - 3.00pm Monday to Friday, excluding public holidays.
Trade Local Delivery - Forklift Required
Flat-rate delivery for local trade customers. All trade deliveries require a forklift for safe unloading. Estimated 1 business day (excluding factory lead time).
| Within 50 km of Somerton VIC | $50 flat rate |
| 50-100 km from Somerton VIC | $75 flat rate |
Panel Products
Panel product delivery rates scale with weight and distance to give you the best possible price across Australia. Estimated 2-3 business days (excluding factory lead time).
Please review our Panel Product Delivery Safety Guidelines before ordering.
| Total Order Weight (kg) | VIC | NSW | ACT | SA | QLD | NT | WA | TAS |
|---|---|---|---|---|---|---|---|---|
| Up to 49 kg | $70 | $110 | $110 | $120 | $130 | $150 | $150 | $150 |
| 50 - 149 kg | $120 | $150 | $165 | $180 | $190 | $230 | $230 | $230 |
| 150 - 249 kg | $140 | $250 | $250 | $280 | $300 | $370 | $370 | $370 |
| 250+ kg | $150 | $470 | $470 | $495 | $510 | $600 | $600 | $600 |
Lightweight Items
Flat-rate shipping Australia-wide. Estimated 2-8 business days (excluding factory lead time).
| Edge Banding, Timber Oils and Pre-Glued Veneer Leaves | $40 flat rate Australia-wide |
| Paper Back Veneers, 1mm Laminates and Liners (excl. Magnetic Laminate & Veneer on Laminate) | $70 flat rate Australia-wide |
Samples
Affordable sample shipping with free standard post in Victoria.
| Local Delivery VIC | FREE Standard Post (2-8 business days) |
| $15 Express Post (1-4 business days) | |
| Rest of Australia | $15 Standard Post (2-8 business days) |
