Formica® Gentle Oak High Pressure Laminate is a decorative laminate surface manufactured in Australia by Formica®, part of the Laminex Group, with a warm grey linear oak with strong sense of wavy movement surface. It is designed for bonding directly to particleboard or medium density fibreboard substrates and is suitable for postforming.

Wood fibres are sourced from certified sustainably managed forests under PEFC Chain of Custody certification, traceable from plantation to finished product. Independently fire tested to a Group 2 classification under AS 5637.1-2015. Formaldehyde emissions tested to ≤ 1.0 mg/m²h (ISO 12460-3). For internal applications only.

Pre-pressed panels: Bord can press Formica® laminates onto substrates and supply as ready-to-install panels. Contact us to enquire about pricing and lead times.

Key Features:

• Manufactured in Australia by Formica®
• Suitable for postforming and curved surfaces
• PEFC Chain of Custody certified
• Group 2 fire classification under AS 5637.1-2015
• Formaldehyde emissions tested to ≤ 1.0 mg/m²h (ISO 12460-3)
• 7-year limited warranty, residential and commercial

Material: High Pressure Decorative Laminate

Colour Code: 1008

Finish (options vary by colour):

• Velour: A highly durable, multi-purpose low sheen finish suitable for benchtops, wall panels, desktops, tabletops, vanities, and cabinetry.
• AR Plus: A high gloss finish for moderate use applications that requires more care and maintenance. Primarily used for benchtops and cabinetry.

Recommended Application: For internal applications only. Must only be bonded directly to particleboard or medium density fibreboard. Not suitable for direct application to plaster, plasterboard, masonry, or concrete.

Postforming: Formica® Decorative Laminate is suitable for curved surfaces. Solid colours can be formed to a minimum radius of 10mm. Patterns, woodgrains, and stone designs can be formed to a minimum radius of 8mm. For cold forming, laminate must be bonded to Craftform MDF with a minimum bending radius of 200mm. Attempting tighter bends may cause cracking or surface damage and should only be undertaken with specialised equipment and thorough testing at the purchaser's risk.

Panel Pressing Service: Bord can press Formica® laminates onto substrates and supply as ready-to-install panels. Contact us to enquire about pricing and lead times.

Installation: Apply using a smooth, even glue layer. Note that contact adhesive must not be used with AR Plus Gloss laminate. Use laminate sheets within 12 months of purchase. Do not allow the protective film to remain on the surface for more than 9 months.

Performance: Stain resistant, heat resistant, water resistant, scratch resistant, and UV stable for indoor use. Independently fire tested to a Group 2 classification under AS 5637.1-2015.

Wet Area Suitability: Suitable for use in kitchens, bathrooms, and vanities. Should not be used with undermount sinks due to risk of water ingress and delamination. Do not expose to frequent or excessive heat or moisture. Do not place hot objects such as saucepans or irons directly onto the decorative surface.

Warranty: 7-year limited warranty, residential and commercial.

Sheet Weight (Approx):

Care & Maintenance: For day-to-day cleaning, use a mild dishwashing detergent diluted in warm water and finish with a clean dry cloth. For streaky marks, use a glass cleaner such as Windex. Do not use solvents, strongly acidic or alkaline cleaners, alcohol-based compounds, commercial cleaning agents, waxes, polishes, undiluted bleach, or ammonia. Do not use the decorative face as a cutting surface. Immediately clean spills containing strong pigments, hair dye, or solvent-based inks. Darker colours will show fingerprints, scratches, and superficial wear more readily and require more careful maintenance.